Unknown Usb Device Driver For Windows 10

admin



Summary :

Device Managers – Windows. Then, right click on the device and select Uninstall. Remove the USB device after the uninstallation. Restart the computer or laptop. Connect your USB device once again, and it will automatically reinstall the device. This way also your unknown USB device problem gets solved.

If the USB device driver is not up-to-date, the Unknown USB Device Set Address Failed error can appear. On the other hand, this issue can also happen after you update the device driver. You need to verify which situation you are facing and then choose to update or roll back the USB device driver. Method 3: Uninstall and update the USB driver in Device Manager. The USB device descriptor failure issue usually has something to do with problematic USB drivers, for example, USB drivers on your computer might be outdated, corrupted, missing or broken. Therefore, you can try updating USB driver to fix the issue. Step 1 Open Device Manager. Connect your device which is not being recognized by Windows. You will see an Unknown USB device (Device Descriptor Request Failed) with the yellow sign in Universal Serial Bus controllers. Now right-click on it and click Uninstall to remove them. Restart your PC and the drivers will be automatically installed.

When you encounter the Unknown USB Device Set Address Failed error, you will be unable to use the USB as normal. To solve this issue, we collect some useful solutions and show them in this post. You can try them to help you out.

SanDisk/Seagate External Hard Drive/WD My Passport Set Address Failed

Sometimes, when you connect an external USB device like a WD my passport, Seagate external hard drive, or SanDisk drive to your computer, you may discover that the drive doesn’t work. Then, you can access Device Manager to check whether there is something wrong with the drive.

There are some common errors like:

  • Unknown USB Device (Port Reset Failed)
  • Unknown USB Device (Set Address Failed)
  • And more…

MiniTool Software hasn’t talked about the Unknown USB Device Set Address Failed issue. In this post, we will show you some solutions.

These solutions are available for WD my passport set address failed, Seagate external hard drive set address failed, and SanDisk set address failed. Of course, if you are using other brands of USB devices, they can also work.

If you are sure the exact reason for this issue, you can try these solutions one by one until you find the most suitable one for your case.

Unknown Usb Device Driver For Windows 10 Free

How to solve unknown USB device set address failed?

  • Modify Power Options
  • Update or roll back the device driver
  • Use Hardware and Devices Troubleshooter
  • Turn off Fast Startup

Solution 1: Modify Power Options

If you are using a laptop, you need to check whether the setting in Power Option is set correctly. You can follow these steps to modify Power Options:

1. Press Win+R to open Run.

2. Type cpl and press Enter to directly open Power Options.

3. Click the Change plan settings link that is next to the preferred plan the system selects.

Unknown device driver download

4. Click the Change advanced power settings link to continue.

5. Scroll down to the USB settings section and then set Disable for both the scenarios: On Battery and Plugged in.

6. Click OK to keep the change.

Unknown Usb Device Driver For Windows 10

Solution 2: Update or Roll Back the USB Device Driver

If the USB device driver is not up-to-date, the Unknown USB Device Set Address Failed error can appear. On the other hand, this issue can also happen after you update the device driver. You need to verify which situation you are facing and then choose to update or roll back the USB device driver.

If you need to update the device driver, you can refer to this post: How to Update Device Drivers Windows 10 (2 Ways).

If you need to roll back the device driver, you can refer to this post: How to Roll Back a Driver in Windows? A Step-by-Step Guide.

Solution 3: Use Hardware and Devices Troubleshooter

You can also use the Hardware and Devices Troubleshooter to get rid of the Unknown USB Device Set Address Failed issue. You just need to go to Start > Settings > Update & Security > Troubleshoot > Hardware and Devices, and then follow the on-screen guide to do the job.

Solution 4: Turn off Fast Startup

1. Press Win+R to open Run.

2. Type cpl and press Enter to directly open Power Options.

3. Click Choose what the power button does.

4. Click Change settings that are currently unavailable.

5. Uncheck the Turn on fast start-up (recommended).

Those are the solutions to Unknown USB Device Set Address Failed. We hope they can help you out. Should you have any related issues, you can let us know in the comment.

If your external USB device is not recognized by Windows 10, and meet Unknown USB Device (Device Descriptor Request Failed) error in Device Manager, use solutions here to troubleshoot and fix the error.

As you have noticed, the USB Device in Device Manager has a yellow triangle on it:

The error can be caused by hardware issues. So first, follow below simple instructions to do the troubleshooting.

1. Try the device on a different USB port. This will figure out if problem is caused by a broken port.

2. Connect the device to another PC. This will figure out if the external device has problem.

If there is no problem with the USB port and the device, read on and try the following methods. You can start at the top of the list and work your way down.

Method 1: Remove the Power Supply
Method 2: Uninstall the USB Driver in Device Manager
Method 3 : Update the USB Driver
Method 4: Disable Fast Startup
Method 5: Change the USB Selective Suspend Settings

Method 1: Remove the Power Supply

This method will fix the problem magically if the problem is caused by Power Supply.

1. Remove the Power Supply plug from PC.

2. Re-plug in the Power Supply.

3. Restart the PC and connect the device to the USB port.

Method 2: Uninstall the USB Driver in Device Manager

Follow these steps:

1. Open Device Manager and expand category Universal Serial Bus Controllers and locate the USB device which is not being recognized by Windows.

2. Right-click on the device and select Uninstall from the context menu.

3. After finishing the uninstallation, restart your PC then Windows will reinstall the device automatically.

Method 3 : Update the USB Driver

The problem can be caused by faulty USB driver. In this case, updating driver would fix the problem.

If you’re not confident playing around with drivers manually, you can do it automatically with Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

1. Downloadand install Driver Easy.

2. Run Driver Easy and clickScan Nowbutton. Driver Easy will then scan your computer and detect any problem drivers.

3. Click theUpdate button next to a flagged USB driver to automatically download and install the correct version of this driver (you can do this with the FREE version). Or clickUpdate All to automatically download and install the correct version ofallthe drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

Method 4: Disable Fast Startup

If Windows is booting quickly,the external device may not be detected before the boot is completed, then the problem will occur. In this case, disabling the fast boot option in Power Options can resolve the problem.

1. Press Win+R (Windows logo key and R key) at the same time. A Run dialog box will appear.

2. Type control in the run box and click OK button. This is to open Control Panel.

3. View by Large Icons and click on Power Options.

4. Select Choose what the power buttons do in left pane.

5. Click on Change settings that are corrently unavailable.

6. Under Shutdown settings, uncheck the box next to Turn on fast startup (recommended). Then click on Save changes button.

7. Restart your PC and see if the problem resolves. Note your PC will boot a little slower.

Method 5: Change the USB Selective Suspend Settings

Follow these steps:

1. In Power Options,click on Show additional plans. (If you tried Method 2, you must know how to go to Power Options. If not, go back to Method 2 and refer the steps to open Power Options.)

2. Click Change settings that are currently unavailable.

3. Select High performance and click on Change plan settings.

4. Click on Change advanced power settings.

5. Click on Change settings that are currently unavailable.

6. Locate USB settings and expand it.

Other Devices Unknown Device Windows 10

7. Expand USB selective suspend setting. Disable both On battery and Plugged in settings.

8. Click Apply button and restart your computer.

Unknown Usb Device Error

Unknown Usb Device Driver For Windows 10

Hp Unknown Device Windows 10

After using methods in this post, you must resolve the Device Descriptor Request Failed error for Windows 10.